FS AP-T565 Guide De Démarrage Rapide page 16

Troubleshooting
The screen displays request timed out
1. Check whether the network cable is intact.
2. Check whether the hardware connection is correct.
3. Check whether indicators of AP and the computer are normal.
4. Check whether the IP address setting of the compute is correct.
LED is off after the AP is powered on
1. For PoE power supply, check whether the power source is IEEE 802.11af/at
compliant, or whether the Ethernet cable is properly connected.
2. For DC adapter power supply, check whether the adapter is connected to an
active power outlet, or whether the adapter works properly.
Ethernet port is not working after connecting
Check whether the device at the other end of the Ethernet cable is working properly,
the Ethernet cable is capable of providing the required data rate, or it is properly
connected.
Wireless client cannot find the AP
1. Check whether the power supply works properly.
2. Check whether the Ethernet port is properly connected.
3. Check whether the AP is correctly configured.
4. Move the client device to adjust the distance between the client and the AP.
15