System Mode - FS AP-T565 Guide De Démarrage Rapide

Step 4: Click "Login" to display the web-based configuration page.
Step 5: Click "System Mode Switch" to switch the FIT/FAP working mode.

System Mode

Current Mode: Fit AP Mode
AC
NOTE: The device restarts after mode switch. Plese wait for a minute.
NOTE: The AP works in Fit AP Mode by default.
Configuring the AP via the Console Port (FAT AP Mode)
Step 1: Connect a computer to the AP's console port using the console cable.
Step 2: Start the terminal simulation software such as "HyperTerminal" on the computer.
Step 3: Set the parameters of the "HyperTerminal": 9600 bits per second, 8 data bits, no parity, 1 stop bit
and no flow control.
Internet
POSE SW
AP
AP CLLENT
Fit AP Mode
Internet
ROUTER
POSE SW
AP
CLLENT
Fit AP Mode
13