Installation Requirements
Before you begin the installation, make sure that you have the followings:
Phillips screwdriver.
Standard-sized, 19" wide rack with a minimum of 1U height available.
Category 5e or higher RJ-45 Ethernet cables and ber optical cables for connecting network
devices.
Site Environment
Make sure the installation site is dry and at.
Keep the controller far away from the heat source.
Ensure that the controller is properly grounded.
Wear an anti-static wrist strap during installation and maintenance.
Keep the controller and installation tools away from walkways.
Use UPS (Uninterruptible Power Supply) to prevent power failure and other interference.
Mounting the Wireless LAN Controller
Desk Mounting
1. Attach four rubber pads to the bottom.
2. Place the controller on a desk.
PWR
WAN
LAN
1
2
3
4
RST
PoE
AC-1004
SYS
Console
WAN
1
2
3
4
DC
53.5V
7