Changing The Interior Lighting Bulb - Beko BU 1100 HCA Mode D'emploi

Changing the Interior
Lighting Bulb
If the lamp does not operate, follow
the following procedures:
1. Switch off the electric connection of
the refrigerator and pull out the plug.
Remove all shelves and drawers for
easy access.
2. Remove the cover carefully by
pressing it on the edge with your index
finger, as seen in figure b. Try not to
damage the plastic cover and interior
facing.
3. First, screw the bulb into its
socket tightly and check whether it is
loosened. Insert the plug again and
switch on the electricity. If the bulb
operates, replace the light cover by
placing the back lock, pushing it onto
its place.
4. If the bulb does not operate,
switch off the electric connection of
the refrigerator and pull out the plug.
Replace the bulb with a new 15 watt
(maximum), screw covered E14 (SES)
bulb.
5. Immediately chuck out the damaged
bulb carefully and properly.
Spare bulb can be obtained from
authorized services.
13
EN