Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
XTRIMMER-Translation of the original instructions
MAINTENANCE AND LUBRICATION
CAUTION!
- Disconnect the plug before performing any cleaning, maintenance or repair operation. Always
wear suitable clothing and working gloves.
- When the machine or part of it is lifted to carry out maintenance operations, always
remember to use suitable fixing tools such as holders and safety locks.
- When carrying out maintenance operations and/or when the machine is tilted without safety
locks or supports,
never leave it unguarded in places where inexperienced people and
children could have easy access to it.
- Protect the environment: carefully dispose of used oils, petrol and any other pollutant
product!
- Effective maintenance and correct lubrication help to keep the machine fully efficient.
RUNNING-IN – Replace the engine oil after the first 20 working hours. Check that there are neither oil
leakages nor loosen screws.
ENGINE OIL
For the maintenance intervals see the engine operator's manual. Replace the engine oil after the first
20 working hours. Then it is recommended to check the oil level every 8 hours and replace the oil
every 50 working hours. Use SAE 30 (API SJ) quantity 0,44 litres.
TIPS FOR PROPER USE
1) Never leave the machine exposed to bad weather conditions.
2) Always clean levers and wires from dust and keep them well-lubricated.
3) Never strain the engine. If smoke comes out of the exhaust, slow down.
4) Frequently check the tyre pressure.
5) Use square section strings or strings with sharp edges in order not to strain the engine.
6) Check the air filter paper after each use (fig. 4). Remove any grass residues, if the air filter paper is
clogged, replace it.
7) Frequently check that the cooling fins of head and cylinders, by dismounting the covers (always
refer to the engine operator's manual).
END OF SEASON MAINTENANCE
Thoroughly clean the machine, replace the engine oil and clean the air filter.
10
Publicité
Table des Matières
