Honeywell DYF012 Serie Guide D'utilisation page 4

HYF023 SERIES OPERATION INSTRUCTIONS (CONTINUED)
• Activate the Timer feature by pressing the Timer button (
(Fig. 18).
Choose from 1, 2, 4 and 8 hour settings by performing the
following functions:
• 1 hour: Press the Timer button once.
• 2 hour: Press the Timer button twice.
• 4 hour: Press the Timer button a third time.
• 8 hour: Press the Timer button a fourth time.
Press the Timer button a fifth time to turn the Timer feature off.
• To turn the fan off after use, press the Power button (
USER SERVICING INSTRUCTIONS
CLEANING AND STORAGE
• Unplug the fan before cleaning.
• Use only a soft, damp cloth to gently wipe the outside surface of the fan.
• DO NOT immerse the fan in water and never allow water to drip into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• Gently wipe the grilles with a cloth. To clean between the grilles we recommend using a pipe cleaner,
flexible dustwand, vacuum cleaner or compressed air to gently remove dust. DO NOT IMMERSE THE
FAN IN WATER AND NEVER ALLOW WATER TO DRIP INTO THE MOTOR HOUSING. DO NOT USE
GASOLINE, PAINT THINNER, OR OTHER CHEMICALS TO CLEAN THE FAN.
• For storage, clean the fan carefully as instructed. Store the fan in the original packaging or cover the
product to protect it from dust. Store the fan in a cool, dry place.
6
)
Fig. 18
) once.
CONSUMER RELATIONS
CUSTOMER SERVICE
Questions or Comments:
Call us toll-free at: 1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at: www.HoneywellPluggedIn.com/fans
Please be sure to specify model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE
YOUR WARRANTY. DO NOT RETURN TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO
OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE.
THIS DEVICE (HYF023 SERIES ONLY) COMPLIES WITH PART 15 OF THE FCC RULES
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
Please note that changes or modifications of this product is not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
7