Filter Assembly/Replacement - ProTeam ProGuard 4 Portable Manuel Du Propriétaire

FILTER ASSEMBLY/REPLACEMENT

WARNING: For your own safety, never connect plug to power source outlet until
!
all assembly steps are complete and you have read and understood the safety and
operation instructions. Do not operate Vacuum with any parts damaged or missing.
To Remove Power Head:
1. Grasp the tank latches on both the right and left side of the power head.
Slowly pull the tank latches away from the tank. Lift the power head off
the tank. Place the power head of the Vacuum upside down (Figure C).
Power
Head
Tank
Figure C
ProTeam
Tank
Latch
Pull Out
And
Lift Up
7