Safety Warnings; Explanation Of Symbols - Ayce JF01C-P1W10-BZH Mode D'emploi

Masquer les pouces Voir aussi pour JF01C-P1W10-BZH:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Read this manual carefully before using this product and check whether there is any damaged part.
The product cannot be installed in case of damages.
Keep this manual for further reference.

SAFETY WARNINGS:

a) Keep this product out of reach of children and unauthorized users.
b) Before servicing or installation, please always disconnect the power supply.
c) The installation of the lamp must be performed by a qualified electrician in accordance with
local regulations.
d) Before the first connecting of the appliance ensure that voltage indicated on the rating label
corresponds the mains voltage in your home.
e) Before using the device, make sure that all screws have been tightened.
f) Do not use the floodlight without a correctly installed safety glass.
g) Do not use the product when it is charging; This could damage the product.
h) The glass will become very hot after long time use, do not touch it.
i) Do not look into the light directly.
j) Pull the mains plug before any maintenance, and let it cool down before any cleaning work.
k) If any part of the product is broken, do not use or charge it, the product must be destroyed.
l) The LED cannot be replaced.
m) Do not leave the product unattended during charging or working.
n) The manufacturer is not responsible for any damage to property or persons in the event of
incorrect use of the appliance.
o) If the power cable is damaged, it must be replaced by the manufacturer, its service after sale or
similarly qualified persons in order to avoid a hazard.
p)
If the glass is broekn, replace it immediately.
q)
Minimum distance from lighted objects 1 m.

EXPLANATION OF SYMBOLS:

Conforms to relevant European requirements for the product.
Disposal together with household garbage is expressly prohibited.
Disused luminaires can be returned at the point of sale.
Cleaning:
Turn off the power to clean the lamp and let the lamp cool. Clean the lamp with a soft cloth
(if necessary slightly moistened).
Never use alcohol or similar solvent, this could damage the lamp.
12 | 13
GB

Publicité

Table des Matières
loading

Table des Matières