T-Fal Express Control Mode D'emploi page 14

• Place the kettle and its power cord well to the back of the work
surface.
• Always unplug the power cord immediately if you observe any
anomaly during operation.
• Never pull on the power cord to remove it from the wall outlet.
• Always remain vigilant when the appliance is on, and in particular
be careful of the steam coming out of the spout which is very hot.
• Also be careful as the body of the stainless steel kettle becomes
very hot during operation. Only touch the handle of the kettle.
• Never leave your hand or the power cord on the hot parts of the
appliance.
• Never leave the kettle connected to its base during filling, pouring,
cleaning or moving.
• Always use the filter.
• Never move the kettle when it is in operation.
• Protect the appliance from damp and freezing conditions.
• The warranty covers manufacturing defects and residential use
only. Any breakage or damage resulting from a failure to comply
with these instructions is not covered by the warranty.
• Any supply connection error will void the warranty.
• The warranty does not cover kettles that fail to operate or operate
poorly due to a failure to descale the product on a regular basis.
• Never use scouring pads for cleaning purposes.
• To remove the anti-scale filter, remove the kettle from its base and
allow it to cool down.
• Never remove the filter when the appliance is filled with hot water.
• All appliances are subject to strict quality control procedures.
These include actualusage tests on randomly selected appliances,
which would explain any traces of use.
• Children should be supervised to ensure that they do not play with
the appliance.
• Keep the appliance out of reach of children.
• Never heat the kettle when it is empty.
• Never fill the kettle past the maximum water level mark, nor below
the minimum water level mark. If the kettle is too full, some water
may spray out.
12