Zyxel ZyWALL 2 Plus Mode D'emploi page 10

This figure helps explain the main fields in the wizard screens.
1 Click VPN in the HOME screen (you may need to scroll up to see the link) to open the VPN wizard.
Note: Your settings are not saved when you click Back.
2 Use this screen to configure the gateway policy.
Name: Enter a name to identify the gateway policy.
Remote Gateway Address: Enter the IP address or
domain name of the remote IPSec router.
ENGLISH
3 Use this screen to configure the network policy.
Leave the Active check box selected.
Name: Enter a name to identify the network policy.
Select Single and enter an IP address for a single IP
address.
Select Range IP and enter starting and ending IP
addresses for a specific range of IP addresses.
Select Subnet and enter an IP address and subnet
mask to specify IP addresses on a network by their
subnet mask.
10