Bridge Mode - Zyxel ZyWALL 2 Plus Mode D'emploi

5 The HOME screen opens.
The ZyWALL is in router mode by default. Continue to the next step if you want to use routing features
such as NAT, DHCP and VPN.
Go to Section 3 if you prefer to use the ZyWALL as a transparent firewall.
6 Check the Network
Status table. If the
WAN status is not
Down and there is an
IP address, go to
Section 5.
If the WAN status is
Down (or there is not
an IP address), click
Internet Access and
use Section 4 to
configure WAN.

3 Bridge Mode

When you set the ZyWALL to bridge mode, it functions as a transparent firewall. Do the following to set the
ZyWALL to bridge mode.
ENGLISH
5