Connecting The Cables - Qcells Q.HOMECORE Serie Guide D'installation Rapide

8 Connecting the Cables

• Before connecting electrical cables, make sure the AC circuit breaker,
PV switch, and DC switch are OFF.
AC Circuit Breaker: OFF
(in the junction box)
• Batteries can be replaced only by qualified personnel. If the battery
needs to be replaced, you must use a battery that meets the
manufacturer's specifications.
• Make sure to match the polarity of the cables properly when
installing. Otherwise, it may cause electric shock or the product may
permanently be damaged. The damage from this is not covered by
the warranty.
• Before batteries are connected, all other connections should be done
and the battery interrupter must be off.
DC Switch: OFF
(in the battery pack)
PV Switch: OFF
(in the inverter)
15