Bottle Unloading Kit; Fluorescent Lamp Disassembly Instructions - FAS International Spirali HDR Mode D'emploi

38

10.9 BOTTLE UNLOADING KIT

(Fig. 14): If the spiral springs in the tray have a six
product capacity, insert the bar in hole "A"; whereas
if the spiral springs have a five product capacity then
insert the bar in hole "B"; if the tray have selections
by product support, insert the bar in hole "C".
E
N
G
L
I
S
H

10.10 FLUORESCENT LAMP DISASSEMBLY INSTRUCTIONS

FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
Door fluorescent lamp:
A) Switch off placing the main switch in position "off".
B) Release the fluorescent light unit from its supports.
C) Cut the wire fastening bands.
D) Remove the ends of the wiring.
E) Replace the fluorescent light.
F) Reassemble by proceeding in reverse order.
Spirali HDR Panzer - Issue 00
Fig. 14