FAS International Spirali HDR Mode D'emploi page 69

Spirali HDR Panzer - Issue 00
Command 61 Resets the security/access code:
Allows the access code used in the EVA_DTS protocol to be reset.
Command 62 Sets discount mode:
A value of 1 set in this command enables the discount feature to operate for timed periods. Value 0 set in
this command will disable the feature.
To set the discount key in the value of the wished timed periods in daily timer 2.
Command 63 Sets single or multivend:
This command determines the vend mode of the machine. With the value set at 0 the machine is working in
single-vend mode, and when the machine is fitted with a suitable coin mechanism the overpaid credit will be
returned automatically as change. Using a simple validator any excess credit is cancelled at the end of each
vend and the amount added to the total value of overpaid cash. If the value is 1, the machine is working in
multi-vend mode. After a sale any excess credit will be displayed and can be retrieved by pressing the coin
return push button or used for subsequent purchases. When an executive coin mechanism is fitted, this
function is programmed through the coin mechanism.
Command 64 Sets the message display language:
This command controls the language in which the messages are displayed.
Value LANGUAGE
Italian
0
1 English
2 French
German
3
(* EPROM with second set of languages)
To display the messages in English, proceed as follows:
1. Go into programming mode to display ......................................................................................... _Command 00_
2. Key in 64 and press the B button to display the present value of the parameter ............................................ _N_
3. Set Value 1 and press the B button.
Command 65 Displays the optional messages:
This command is used to modify the messages displayed by the machine in stand-by (machine ready for vending).
By setting the command at 1, the machine displays the message "insert card", which can be used when the
payment system is the credit card type.
Commands 66-67 Internal temperature and evaporator temperature display:
The value set at these commands determines the information shown on the second line of the display (see table).
As default, the clock is displayed.
Command 66 Command 67
0 0
1 0
0 1
1 1
Command 68 Modifies displayed currency:
This command allows the currency displayed when a product is selected to be chosen. The currencies
available are shown in the following table together with the code to be programmed:
p. code 01 (Pence)
K* code 04 (Czeches kronas)
kr. code 05 (Krona)
Kr code 09 (Danish krone)
Chf code 10 (Swiss francs)
Rand code 13 (South African rand)
(* EPROM with second set of languages)
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
Value LANGUAGE
4 Dutch
5 Swedish (* Slovenian)
6 Finnish
Spanish
7
Displayed value
Displays clock
'' internal temperature
'' internal temperature + evaporator temperature
'' clock + internal temperature
$
ps.
(* Slovenians thalers) /
Euro
R$
Kr
Value
(* Czech) 8
9
10
code 14 (Australian dollars)
code 15 (Argentinian Pesos)
code 16 (No currency displayed)
code 17 (Euro)
code 18 (Brazilian Real)
code 19 (Norwegian krone)
23
LANGUAGE
Portuguese
Danish
Norwegian
E
N
G
L
I
S
H