Spengler ES-60 Manuel D'utilisation page 28

FR
Malfunction
The display remains empty
when the instrument is
EN
switched on.
Batteries have been installed.
ES The pressure does not rise
although the pump is running.
The instrument frequently fails 1. Ensure the cuff fits correctly.
to measure the blood pressure
IT
values, or the values measured Ensure tight clothing such as a a rolled-up
are too low (too high).
DE
Further information
For licensing, this device has been subjected to strict clinical tests and supervised
by experienced Cardiac Specialists. This device is manufactured to meet Euro-
NL
pean standards under the supervision of the Technical Monitoring Association.
(RWTüV-Essen).
If you have any questions regarding the use of this blood pressure monitor, please
ask your dealer for the Spengler Service representative in your country. The Spen-
AR
gler Service Team will be happy to help you.
28
Remedy
1. Check that the battery pack is charged.
2. If the display is erratic or unusual, remove the
batteries and re-install new batteries.
3. Battery pack might be damaged and needs to be
replaced.
1. Check the connection of the cuff tube and
connect properly if necessary.
2. Make sure that the cuff is not too tight.
sleeve isn't exerting pressure on the arm above
the measuring position. Take off articles of
clothing if necessary.