Ec Declaration Of Conformity - USAG 929 PC1 1/2 Notice D'utilisation Et Instructions

MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel. For such jobs, you can contact USAG's repair centre.
DISPOSAL
The pneumatic tool, accessories and packaging should be sent to a waste disposal centre, in accordance with the laws in force in your
country.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month warranty for professio-
nal use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or replacing them at our
discretion. Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged. This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this
warranty will no longer be valid if any changes are made, or if the pneumatic tool is forced or sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
WE, STANLEY BLACK & DECKER ITALIA S.R.L. VIA VOLTA, 3 - 21020 MONVALLE (VA) ITALY, DECLARE UNDER OUR OWN
RESPONSIBILITY THAT THE USAG PRODUCT 928 AC1 1/2 - ALUMINIUM IMPACT WRENCH - IS IN CONFORMITY WITH THE
«MACHINERY» DIRECTIVE 2006/42/EC
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-6: 2012
THE UNDERSIGNED IS RESPONSIBLE FOR COMPILATION OF THE TECHNICAL FILE AND MAKES THIS DECLARATION ON BEHALF
OF USAG.

EC DECLARATION OF CONFORMITY

13
22.11.2017
Director Engineering