Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTENTS
The StarPet Pro kit comprises
(a) StarPet Pro cordless pipette controller
(b) Charger; either
220V-240V 50/60Hz 3-pin (UK),
100V-120V 50/60Hz 2-pin (USA),
220V-240V 50/60Hz 3-pin (India), or 220V-240V 50/60Hz 2-pin (Australia)
(c) Two spare hydrophobic filters, 1 x 0.45μm and 1 x 0.20μm
(d) Bench stand / wall bracket
(e) Instruction manual
SAFETY INSTRUCTIONS
The StarPet Pro has been designed with safety in mind. It is lightweight and balances safely in the hand.
The triggers have been carefully designed to eliminate pressure points and control of intake and delivery
is, therefore, made easier.
It is recommended when using deleterious liquids that the user wears protective clothing including
goggles and gloves. If in doubt ask your safety officer. Please consult and establish appropriate health
and safety practices applicable to the liquid being dispensed within your working environment.
WARNING!
• Only use this instrument within the recommended limits of its chemical resistance.
• Never use with fuming liquids which are incompatible with ASA, silicone or polyproplyene.
• Never use with highly flammable liquids.
• Observe the reagent manufacturer's safety information.
• Never use the instrument in an atmosphere with danger of explosion.
• Always store on bench stand or wall bracket when not in use.
• Never use force when in use.
• Should the instrument fail to work to specification, stop pipetting and check instructions
headed Trouble Shooting (see page 7).
• Only recharge with manufacturer's original charger.
• All repairs must be carried out by an authorised dealer.
• Only use the manufacturer's accessories and spare parts.
• Charger must only be used indoors and protected against moisture.
4
220V-240V 50/60Hz 2-pin (Europe),
100V-120V 50/60Hz 2-pin (Japan),
StarPet Pro Operator Instructions
Publicité
Table des Matières
