GPO EMPIRE Mode D'emploi page 13

HOW TO REPLACE THE TURNTABLE STYLUS
(NEEDLE)
Removing old stylus
1. Set a screwdriver at the tip of the stylus
and push down in the direction "A".
2. Remove the stylus by pulling it forward
and down.
Installing a new stylus
1. Hold the tip of the stylus and insert the
other edge by pressing in the direction "B".
2. Push up in the direction "C" until it
locks at the tip.
GPO_EMPIRE_Manual EU - Dec 2017_v1.indd 13
13
07/12/2017 21:53