Doughty Zenith Mk 3 Mode D'emploi page 8

DECLARATION OF CONFORMITY.
According the EC Machinery Directive 89/392 EEC
Manufacturer's Name:
Manufacturer's Address:
Declares that the product:
Product Name:
Model Numbers:
Accessories covered:
Conforms to the following Product Specifications in their standard design
when used for lifting and lowering loads as directed in the supplied
instructions:
Safety:
Also as detailed in:
Supplementary Information: The product herewith complies with the
requirements of the Machinery Directive 89/392/EEC as amended by the
Directives 91/368/EEC, 93/44/EEC, 93/68/EEC, 98/37/EC and carries the
CE marking accordingly. GS symbols were awarded for the above types.
Test certificate number: AL 00 04 20319 010. The units supplied conform
to the tested types.
The product, when elevated and secured with locking pins as detailed,
complies with VBG70 (GUV 6.15).
Ringwood, March, 2000
Doughty Engineering Limited.
Crow Arch Lane.
Ringwood.
Hampshire.
BH24 1NZ.
England.
Zenith Mark 3.
520R, 520T, 620R, 620T
Optional extended base plate.
DIN 15560
EN 292 Part 1, EN 292 Part 2
Nigel D Curtis, General Manager
8