Doughty Zenith Mk 3 Mode D'emploi page 2

Contents:
1. Manufacturers guarantee
2. Introduction
3. Safety Precautions
4. Assembly
5. Operation
6. Maintenance and Cleaning
7. CE Declaration
2. Introduction
Dear Customer,
In order to ensure reliable operating of the Zenith range of stands is
possible, we have created this manual. Before use you are required to
read these instructions.
The Zenith stands are subjected to stringent tests prior to manufacture and
each stand is inspected through the manufacturing and assembly processes.
In order to maintain this guarantee of function and safety original
parts of the manufacturers design must be used. The user forfeits all
rights to claim if parts are not of original specification, or if the stand is
modified in any way.
Due to our policy of continuous improvement, Doughty Engineering
Limited reserve the right to amend or alter the specifications of the product
at any time without prior notice. When requiring spares or service, please
quote the model type and year of manufacture as indicated on the stand.
Load:
Type 520: 10kg - 200kg SWL
Type 620: 10kg - 200kg SWL
Height:
Type 520: 1.73m - 5.21m floor to receiver top
Type 620: 1.94m - 6.10m floor to receiver top
Unit weight:
Type 520: T: 76kg
Type 620: T: 82kg
The stand is manufactured from mild steel (DIN 2394) box sections
throughout, and primarily comprises 4 telescopic mast sections, steel
stabiliser legs and struts. The cable used is of DIN 15020 1770N/mm²
(6mm/7x19) grade and must be replaced with this specification.
The stand is available in two configurations. The turnbuckle base comprises
R: 93.5kg
R: 99.5kg
2