Cleaning Setting; Timer Setting - Warm Tech PAP24000 Mode D'emploi

The time can by select, also using

CLEANING SETTING

After keeping pressing the key,
Seconds to cleaning the burning pot by the key
For example Every 30mins Last 15 seconds:

TIMER SETTING

On the display the following wording will appear
With this function you program the heater for a weekly programming, associating the switching
on and the switching off at the pre fixed timetables. You can program daily switching on and
switching off for the whole week.
By keeping pressing the key
Then you can press
By pressing
On the superior line it is showed the day which is programming, the hour with the
functioning state.
On the below line the programmed hour are displayed.
• Lower one means off, taller on means on, which also shows on superior line
, you can adjust every X mins, last Y
, you will found the attached instruction above,
to choose week days
, to select hours, then press
, to select the right one.
to decide the hour on or Off.