Warm Tech PAP24000 Mode D'emploi page 94

Note: if the ignition is failure, the thermal control will shut off the stove automatically. If want to restart it
again, Please Switch off the power for a while and then switch on the power (In order to shut down the
previous process of program), follow the above process to ignite and start again.
FLAME POWER VARIATION
Depending on the heating desire, fuel intake quantity can be adjusted from few to large by the fuel
intake Button. For example,
Pressing the key
MINIMUM POWER P4
LOW POWER P3
MEDIUM POWER P2
MAXIMUM POWER P1
the feed quantity can be changed, the display shows the selected power.