auna multimedia KR-200 Mode D'emploi page 36

Once you have found a track you want to play, press SELECT. A short press plays the track immediately.
Repeat/shuffle
You can set to repeat tracks or play them in random order. Press
Now playing information
While a track is playing, the screen shows its track and artist or file name. There is also a progress bar with figures for
elapsed and total track time. At the bottom of the screen, an icon indicates UPnP. To view further information, press
INFO.
Each time you press INFO, another set of information is displayed, cycling through the information:
UPnP: track/artist/progress bar/track times, album, codec/sampling rate, playback buffer and today's date.
DAB mode receives DAB/DAB+ digital radio and displays information about the station, stream and track playing.
Scanning for stations
The first time you select DAB radio mode, or if the station list is empty, unit automatically performs a full scan to see
what stations are available. You may also need to start a scan manually to update the list of stations for one of the
following reasons:
• Available stations change from time to time.
• If reception was not good for the original scan, this may result in an empty or incomplete list of available stations.
• If you have poor reception of some stations (burbling), you may wish to list only stations with good signal strength.
To start a scan manually, choose Full scan. To scan only stations with good signal strength, select Local scan.
Once the scan is complete, the radio shows a list of available stations. To remove stations that are listed but not una-
vailable, choose Prune invalid.
Turn the navigatereel to view a list of stations and press to select. Once selected, the station plays and the screen
shows information about station, track or show as broadcast.
and on the remote control for shortcut.
DAB
36