auna multimedia KR-200 Mode D'emploi page 28

mode, so it is best to select a mode you use regularly.
DAB and FM use timesignals broadcast with radio transmissions. Network uses a time signal sent from the Internet
radio portal when in any network-connected mode.
Time zone, daylight
Set your time zone. If you country uses daylight saving and it is in effect,turn on the Daylight savings option.
Manual update
If you set No update, the wizard prompts you to set the time and date manually.The date and time are displayed as
dd-mm-yyyy and hh:mm.
The active value appears as flashing. Adjust each value with the navigatereel or /on the remote control. Oncethevalue
is set,press to continue setting with next value.
Network
Wlan region
Select the Wlan region to obtain the optimal Wlan connectivity: Canada, Spain, France, Japan, Singapore, Austra-
lia, and Republic of Korea.
Scanning for the network
The unit is compatible with all common network protocols and encryption methods.It searches for the available
networks and list them out for you choose.
There will be hints for the type of network ([WPS] before the SSID (the name of network device)). Select the one
you want to connect to.
For the wireless connection, you will be asked for input encryption in the next step.
Standard encrypted network
To enter the network's key, use the navigatereelor direction keys on the remote controlto move the cursor through
the characters and press to confirm. As each character is selected, the key is built up near the top of the display.
There are three options accessible by tuning the navigatereel back before the first characters –Backspace, OK and
Cancel.
WPS encrypted network
WPS encrypted networks are identified by WPS at the start of the network name when the unit searches the
available AP. Useone of the following methods of connection:
• Push button
The unit prompts you to press the connect button on the router. It then scans for a ready Push Button Connect
network and connects.
28