Klarstein DELICATESSA 3 Mode D'emploi page 66

EN
66
Problem Possible Cause
The function The buttons are locked because
buttons do not the child lock is activated. "Lo"
react or are appears in the timer display.
very difficult to
A thin film of water or a wet
operate.
cloth is on the control panel
and the automatic overflow
protection has been activated.
You are using the fingertips
instead of the ball of your
finger.
After cooking The automatic safety function
there is "H" residual heat warning has been
shown on activated.
display.
After switching The induction hob is completely
off, the fan of cooled down by the continued
the induction operation of the fan.
hob remains
working for a
while.
Some pans These noises are caused by the
make crackling induction coils during cooking.
or clicking Due to their construction,
noises. such noises can also occur
with certain cooking utensils,
as the bases are often made
of different materials which
expand differently when
heated.
Possible Solution
Deactivate the child lock (see
"Deactivate the child lock" in
the "Other Functions" section).
Check if the buttons are dry
and wipe them dry if necessary.
Use the ball of your finger.
That is normal. The hob is
equipped with safety functions
to warn against residual heat.
It remains on until the surface is
cool enough to touch.
That is normal. The "run-on"
of the fan is not a fault, but the
necessary cooling function of
the hob.
This is not an error, such noises
are normal.