MAINTENANCE
CLEANING THE BOILER
To maintain your steam cleaner in good condition and to ensure constant performance, we recommend that
you periodically clean the boiler
1.
Before cleaning the boiler, make sure that the boiler is at room temperature, that it has not been used
for at least 8 hours, and that the steam cleaner is disconnected from the power source.
2.
Unscrew and remove the boiler cap ( 1 ). Turn the steam cleaner over and empty all the remaining water from the boiler.
3.
Using the provided funnel, refill the boiler with equal parts of water and white vinegar ( for a maximum of 500ml or 17 oz )
and leave the boiler cap open. Let sit overnight.
4.
Drain the boiler, and rinse thoroughly with clean water.
5.
Refer to page 8 for instructions on how to refill and turn on the machine.
ATTENTION:
It is not recommended that you use any other chemical to clean this product.
Doing so will automatically void the warranty.
O'RINGS
If the attachment connections dry up after intensive use, put a small amount of lubricant (Vaseline) around the O-rings on the male attachment.
after every 50 hours of use or less depending on water hardness.