Home dupray Manuel D'utilisation page 11

ADJUSTING THE STEAM PRESSURE
Adjust the desired steam pressure using the steam pressure dial on the steam cleaner,
from minimum ( left ) to maximum ( right ). Connect the accessory that you want
to use to the steam hose.
To release steam, simply press the steam release trigger on the hose handle.
REFILLING WITH WATER
When steam runs out or if the low water indicator comes on during usage and you would like to continue using the steam cleaner,
you will need to follow theses steps:
TURN THE UNIT OFF
by pressing the OFF button.
IMPORTANT:
Do not overfill. Leave space for steam!
WARNING:
If all steam pressure has not been released,
steam may escape from the boiler cap when opening,
use caution.
RELEASE STEAM PRESSURE
AND WAIT
RELEASE ALL STEAM PRESSURE
by pressing on the steam release trigger on
the hose and let the steam cleaner
cool down for 10 minutes.
MINIMUM
REFILL WITH 700 ML ( 23 OZ. ) OF WATER.
Refasten the boiler cap (1) and press the power button (2)
ON. Wait about 8 minutes for the SteamReady™ indicator
(6) to turn on and continue steam cleaning.
en
MAXIMUM
10