Fig. 3a
Dimensions PR 6241/12...53 (version 1)
Fig. 3b
Dimensions PR 6241/12...53 (version 2)
F - 6
Tightening the lock nuts
Fig. 9
Tightening the lock nuts
CAUTION
- Never clamp the load cell into a vise.
- Apply the spanner correctly to avoid damaging the load cell!
Changes of temperature ≥15 K/h may influence the measuring accuracy. To prevent
the load cells from direct heating or cooling effects (sun, wind, heat radiation) heat
protection shields or heat protection housings are to be installed if necessary.
To prevent force shunts, all connections of the weighing facility to the surrounding
construction (pipes, cables, bellows) must be coupled as flexibly as possible.
E - 11