1.Memory is full.
2.Memory card is not formatted
correctly.
Image is blurry or out of focus.
1.The camcorder was moving
when the image was captured.
Image is not displayed on the LCD monitor.
1.A memory card with non-JPG
images (recorded with other
camera) is loaded.
Recorded files are not saved in memory.
1.The camcorder was turned off
before the files are saved in
memory.
★Insert a new memory card.
★Format the memory card again
or use a new card.
★ Hold the camcorder steady
when shooting picture.
★This camcorder cannot display
non-JPG images.
★ If the battery low indicator
appears on the LCD monitor,
recharge
immediately.
Page
39
of 41
the
battery