Changing The Tool - stayer PRO 300 Instructions D'emploi

Vibration total values (triax vector sum) determined
according to EN 60745:
Sanding: Vibration emission value
2
a =2 m/s , uncertainty K=1.4 m/s
h
Cutting with plunge cut saw blade: Vibration
emission value
2
a =10 m/s , uncertainty K=1.5 m/s
h
Cutting with segmential saw blade: Vibration emission
value
2
a =6.5 m/s , uncertainty K=1.5 m/s
h
Scraping: Vibration emission value
2
a =4.5 m/s , uncertainty K=1.5 m/s .
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool
with another.It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for
different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
3. Assembly

Changing the Tool

l Before any work on the machine itself, pull the
mains plug.
l Wear protective gloves when changing application
tools/accessories. Contact with the application
tool/accessoriy can lead to injuries.
ENGLISH
2
2
2
2
12
Selecting the Application Tool/Accessory
Accessory
HSS wood
segment saw
blade
BIM segment saw
blade
HSS plunge cut
saw blades, wood
BIM plunge cut
saw blades, metal
BIM plunge cut
saw blade, wood
and metal
Base plate for
sanding, series
Delta 93 mm.
Mounting/Replacing the Application Tool/ Accessory
180 Turn the lever 7 to extract useful and change it.
Re turn around to fix the tool.
l Check the tight seating of the application
tool/accessory. Incorrect or not securely fastened
application tools/accessories can come loose during
operation and pose a hazard.
Mounting/Replacing a Sanding Sheet on the Sanding
Plate
The sanding plate 9 is fitted with Velcro backing for quick
and easy fastening of sanding sheets with Velcro adhesion.
Before attaching the sanding sheet 10, free the Velcro
backing of the sanding plate 9 from any debris by tapping
against it in order to enable optimum adhesion.
Position the sanding sheet 10 flush alongside one edge of
the sanding plate 9, then lay the sanding sheet onto the
sanding plate and press firmly.
To ensure optimum dust extraction, pay attention that the
punched holes in the sanding sheet match with the holes in
the sanding plate.
12
Material
Wooden materials,
plastic
Wooden materials,
plastic.
Wooden materials,
plastic, gypsum and
other soft materials
Metal (e.g.
unhardened nails,
screws, smaller
profiles), non-
ferrous metals
Wood, metal, non-
ferrous metals
Depends on
sanding sheet