Trouble Shooting; Important Notice - Geemarc CLA 1 Notice D'utilisation

TROUBLE SHOOTING

IMPORTANT NOTICE:

The CLA 1 will work with all CLEARSOUND 50 to 500 series. It
may happend that CLA 1 does not work with telephones from others
suppliers, we cannot guarantee the functionality of the
CLA 1 in this case.
Note: if you get a loud noise oscillation or crackling when connecting
the headset simply press the switch (7) located under the
CLA 1 to avoid the problem (earpiece polarity).
TROUBLE SHOOTING
- No dial tone: Make sure everythings is connected in the correct
plugs.
- The receiving level is too low or too high: Check the CL-B/CL
switch located under your CLA 1.
- Crackling into the headset or earpiece: check the switch (7)
located under the CLA 1.
- Nothing happens after following the instructions above: check your
telephone and the network connection.
For product support and help visit our website at www.geemarc.com
telephone 01707 384438
or fax 01707 372529
7