Connecting The Cla 1; Select Your Phone - Geemarc CLA 1 Notice D'utilisation

SETTINGS
SETTING

Connecting the CLA 1

To connect the CLA 1 to your phone please follow the instructions
carefully. See pictures on page 3 to locate the plugs and socket.
1 - Disconnect your handset from your phone base.
2 - Connect the CLA 1 short curly cord (4) to the handset phone
socket.
3 - Connect the handset curly cord to the CLA 1 handset socket
(3) .
4 - Connect the headset (option) to the headset socket (1) .

Select your phone

To have the best receiving level set the switch CL-B/CL (6) located
under the CLA 1 to the desired position, the CL-B position must
be used for phones with handset boost feature (like CL 200,CL
400, CL 500) and CL position for normal phone (like CL 50, CL
100).
Select the function mode (Handset / headset)
You can select the function mode by using the switch (2) located
on the CLA 1 top to select the handset by setting the switch to the
position and the headset by setting the switch to the .
The CLA 1 is now ready to use.
Note: The CLA 1 functionality are only guaranted with Geemarc
telephones CL 50 to CL 500 range.
5