INDEX DESCRIPTION SETTING UP - Connecting the CLA 1 - Select your phone - Select the working mode (Handset / headset) - How to use the handset - How to use the earpiece - How to use the headset (option)
DESCRIPTION DESCRIPTION Earpiece (5) Headset socket (1) Base cord connection (4) (*) Headset/ Handset select switch (2) Handset socket (3) Headset hook/Rack mounting Hook/Rack slide for mounting (insert up to listen «clic») Hook/Rack Earpiece polarity CLB/CL switch (7) switch (6) (*) Classified TNV-3 according to EN60950 standard.
Page 4
DESCRIPTION View of the CLA 1 after Hook/Rack mounted: View of the CLA 1 with a headset on Hook/Rack: Note: Headset is an option and is not supplied with the CLA 1. Geemarc headset reference : HEADSCL_BLK...
Select the function mode (Handset / headset) You can select the function mode by using the switch (2) located on the CLA 1 top to select the handset by setting the switch to the position and the headset by setting the switch to the The CLA 1 is now ready to use.
When you receive a call, lift your handset and place it near the phone base, make sure that the switch (2) is set to . Then speak and listen your correspondent with your headset (Geemarc headset ref: HEADSCL_BLK) . At the end of the call replace the handset in the phone cradle.
TROUBLE SHOOTING IMPORTANT NOTICE: The CLA 1 will work with all CLEARSOUND 50 to 500 series. It may happend that CLA 1 does not work with telephones from others suppliers, we cannot guarantee the functionality of the CLA 1 in this case.
Radio and Telecommunications Terminal Equipment Directive 1999/5/EEC and in particular article 3 section 1a, 1b and section 3. For product support and help visit our website at www.geemarc.com telephone 01707 384438 or fax 01707 372529...
DESCRIPTION DESCRIPTION Ecouteur (5) Prise casque (1) Cordon de connection à la base (4) (*) Interrupteur de sélection Casque/Combiné (2) Prise combiné (3) Montage du support casque Glissière de montage du support (insérer jusqu’au «clic») Support casque Interrupteur polarité Interrupteur casque (7) CLB/CL (*) Classée TRT-3 selon la norme EN60950...
Page 10
DESCRIPTION Vue du CLA 1 avec son support casque: Vue du CLA 1avec un casque sur son support: Note: Le casque est une option et n’est pas fourni avec le CLA 1. Référence casque Geemarc : HEADSCL_BLK...
1 - Déconnectez le combiné de la base de votre téléphone. 2 - Connectez le petit cordon du CLA 1 (4) sur la prise combiné de votre base. 3 - Connectez le cordon de votre combiné sur la prise de connection combiné...
Vérifiez que l’interrupteur (2) est placé sur la position . Vous pouvez parler et écouter votre correspondant avec le casque (référence casque Geemarc: HEADSCL_BLK). A la fin de la conversation, replacez simple- ment le combiné sur son support.
NOTE IMPORTANTE: Le CLA 1 fonctionne avec toute la série des CLEARSOUND 50 à 500 et BB100 à BB300. Il peut arriver que le CLA 1 ne fonctionne pas avec des téléphones provenant d’autres fournisseurs, nous ne garantissons pas le fonctionnement du CLA 1 dans ces condi- tions.
(nor- mes TBR21/37/38). TEL. SERVICE APRES VENTE : 03 28 58 75 99 Pour tout renseignement technique ou toute commande visitez notre site web sur www.geemarc.com. Parc d’Activités du Basroch 2, rue Galilée 59760 Grande Synthe UGCLA 1Ed-01...