Setting Up - How To Connect The V2T-10 To The Telephone; Setting Up - How To Connect The V2T-10 To The Smart-Phone - Geemarc V2T-10 Mode D'emploi

Setting Up – How to Connect the V2T-10 to
the Telephone
To connect your phone to the V2T-10:
● Unplug the Handset cord from your telephone base socket.
● Connect one end of RJ9 to RJ9 cord supplied with the
V2T-10 to the telephone base socket and one end to the
input socket (4) (
● Connect your handset cord to the output socket (5)
( ) located at the front of your V2T-10.
IMPORTANT: The V2T-10 cannot be used with one-piece
telephones which have a keypad on the handset.
Setting Up – How to Connect the V2T-10 to
the Smart-Phone or Tablet
To connect your smart-phone or tablet to the V2T-10:
● Connect one end of 3.5mm to 3.5mm cord supplied with
the V2T-10 to the 3.5mm socket of your smart-phone or
tablet and one end to the Audio output port (6) (
located at the right hand side of your V2T-10.
● Download our Live Transcribe App from Google play and
run it on your smart-phone or tablet.
) located at the top of your V2T-10 .
6
INSTALLATION
)