Datamars Unigizer 15000i Mode D'emploi page 14

being used to supply the main farm fence. In this case,
the main farm fence will receive full output energy and
the separate fence will receive lower output energy.
Note: If both terminals are inadvertently connected to
different parts of the same fence system, the entire fence will
be supplied with full output energy (as if it were connected
to the Fence high energy terminal (red)). When using the
Fence low energy terminal (yellow) and the Fence high
energy terminal (red) at the same time, ensure that the fence
systems they are connected to are completely separate.
Fence designs
Fences can be constructed to suit the type of livestock and
materials available. Discuss with your reseller which design
best suits your needs. Some suggested fence configurations
are below.
Cattle and horses
10-15 m (33-49') spacing, posts only
15-20 m (49-65') spacing with droppers
Sheep, goats, cattle and horses
10 m (33') spacing, posts only
14
15 m (49') spacing with droppers
Wild animals
7 wire, 10 m (33') spacing with droppers
End assemblies
Angle stay
Suitable for field gate, high-tension strainer.
After firmly setting the footed strainer in the ground, dig in
the stay block just below ground level, at a distance to
ensure the angle stay will be held snugly in position. The stay
can be levered into position with a spade.
All-live system
Fence-return system