Safety Information - RS Pro RS 53II Manuel D'utilisation

 Safety Information
To ensure safe and reliable operation of this
thermometer, read these instructions fully before use.
Failure to use this thermometer as described in these
instructions may result in personal injury or damage to
the thermometer or other equipment.
Before using the thermometer, inspect the case and
-
probe(s) for damage. Do not use the thermometer if
it appears damaged.
Check the thermometer for correct operation before
-
using it to make measurements. Do not use it if it
operates incorrectly, but return it to RS Components
for repair or calibration – The address is given at the
end of these instructions.
Disconnect the thermocouple probe(s) from the
-
thermometer before opening the case to replace the
batteries.
Do not use the thermometer in an environment
-
where explosive gas, vapor, or dust may be present.
Do not use the thermometer to measure the
-
temperature of Hazardous Live conductors or
equipment.
Model 55II : Measurement errors may occur if
-
voltages on the measurement surfaces result in a
potential difference greater than 1 V between the
two thermocouples. When potential differences are
anticipated between the thermocouples, use
electrically insulated thermocouples.
 Caution
If the thermometer is used in the vicinity of
equipment which generates electromagnetic
interference, the display may become unstable or
the measurements shown may be subject to large
errors.
2