Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT:
When the heating mode is on, it is sometimes necessary to wait several minutes before
the start of the heat pump in the heating mode (especially if you switch from Cooling to
heating mode)
In Heating mode, the desired temperature can be set between 16 °C and 27 °C, using
the buttons
«
» or «
»,
key or the remote control.
Note: In Heating mode: the air exhaust hose must vent outside.
5.7. Fan speed control:
The fan speed has 3 settings: High
, Medium
, Low.
.
5.8. Timer:
AUTO TURN OFF:
When the power is on, press the timer button to select the number of hours during which
you would like the device to run in air conditioning mode, before it stops automatically.
AUTO TURN ON:
When the machine is in standby mode, press the timer button to select the desired
number of hours before the unit turns on automatically in cooling mode.
5.9. TIMER / TEMP Set controls:
Used for adjusting the timer and thermostat
Room temperature is displayed by default
In cooling mode, if you press the
«
» or «
»,
the set temperature is displayed and
can be adjusted. After 15 seconds, the display returns to room temperature. The
temperature can only be set in cooling mode. Timer can be set between 1 and 24 hours.
Note: Simultaneously press the buttons
«
» or «
»,
for 3 seconds to toggle the display
between Celsius and Fahrenheit.
After switching off the air conditioner, you must wait 3 minutes before restarting the
machine.
IMPORTANT
To optimize the performance of your air conditioner, we recommend that you do not
expose it to direct sunlight during operation (if possible, draw the curtains or shut the
blinds).
6. REMOTE CONTROL:
Use only
2 AAA batteries, 1.5 volts, not included.
Used batteries must be disposed safely. Dispose them in collection bins provided (check
with your dealer) to protect the environment
Respect the polarities (+) and (-) when inserting them.
Your remote control includes the same functions as those shown on the control panel of
the air conditioner.
GB-10
Publicité
Table des Matières
