THOMSON THCLI123NER Manuel D'utilisation page 22

With exhaust nozzle or with fixture
3.AIR CONDITIONING WITH SEMI-PERMANENT INSTALLATION:
If necessary, your device may also be installed semi-
permanently. (Fig 1)
Proceed as follows:
=>Drill a hole in an exterior wall or window glass.
Respect the height and dimensions of the hole (Fig 2)
=> Attach the fixture into the hole
=>Install the exhaust hose in the housing, at the back
of the appliance.
Adapt the end of the exhaust hose to the fixture as
shown (Fig 3)
When the hose is not in use, place the cap on the
fixture to cover the hole.
NOTE :
When installing the air conditioner semi permanently,
you should leave a door slightly open (as little as 1cm)
to guarantee sufficient ventilation.
Extend the exhaust hose and close the window as
much as possible trapping the exhaust nozzle as
below shown.
GB-6