Ayce MJ1402B Notice Originale page 31

Assemble the appliance with scraper. Switch on the window cleaner, push the scraper
touch the window, clean the window from top to down, suction the dust water into the tank.
The scraper is only use for water and big plane surface.
3. Use as a vacuum:
Assemble with the little brush or soft crevice tool, suction the dust or water into the tank.
The soft crevice can be used for dust and water.
The little brush only used for dust.
Empty the tank:
ATTENTION: HOLD THE TANK BEFORE RELEASE THE TANK FROM THE UNIT. If push the
release button directly, the tank will drop down.
Remove the accessory from the connector. Hold the tank, push down the tank release but-
ton. Turn the tank a little and take it out.
Take out the filter unit, empty the tank. Remove the filter and connector to clean.
Clean the tank and filter.
ATTENTION: Keep the filter dry before assembly the filter unit.
TROUBLE SHOOTING
Trouble describe Reason
Spray bottle 1. Spray head closed
doesn't spray
2. Spray system is defective
Water go out 1. Leakage of the seal
2. Filter is not on right position
3. Water is excel the max line
No suction 1. Battery is not full charge
2. Filter is shocked
60 61 GB
Solution
Make the head at spray or stream
position
Contact dealer to replace
Check the rubber seal of the filter
unit, if it is damaged, contact the
dealer to change
Put the filter plane to the step of the
tank
Empty the tank
Full charge the appliance
Clean the filter and keep it dry
08/2015