Technical Data - Ayce MJ1402B Notice Originale

TECHNICAL DATA

Model:
Voltage supply:
Motor power:
Battery:
Battery charging time:
Battery operating time:
dust tank:
Adapter:
Max suction efficiency:
CONTENTS
2
4
3
12
1. Scraper
2. Crevice tool
3. Small brush
4. Dust tank unit
5. Turning connector
6. Tank release button
7. Switch button
8. Body unit handle
9. Charging indicator
MJ1402B
7,4V 2000mAH
30 W
Li-ion
3-5 h
25-30 min
200ml
Input:100-240V ~ 50/60Hz 0,2A
Output: 9V 500mA
2,8 kPa
13
5
6
6
7
14
7
8
8
16
15
9 9
10
10
11
11
12
17
10. Charging hole
11. Extension tube hole
12. Air outlet
13. Cleaning mop
14. Mop support
15. Water bottle
16. Charger
17. Extension tubes
ASSEMBLE THE UNIT
1. Assemble the filter
• Put the filter into the filter support,
• Then turn the filter as right clock direction
• To the stop position.
• Turn left direction to take out the filter.
2. Assemble the filter unit into tank
• Align the rib and slot, put the filter.
• Unit into the tank, align the filter.
• Unit plane to the step of the tank.
• ATTENTION: If the filter unit is not in the right position, there is risk of leakage.
If the filter unit is not in the right position, there is risk of leakage.
Don't use the cleaner without the filter in tank.
close open
slot
rib
step
54 55 GB
08/2015