Factory Settings; Software Update; Display Illumination - auna Connect CD Mode D'emploi

Time / Date
Setting of time, date, display format, auto update function, time zone and
summer/winter time.
Language
The factory default menu language is English. Choose from a variety of
functions in this submenu. Use the NAVIGATION/OK dial to select and press
to confirm.

Factory Settings

Here you can reset all settings to the default values. Please note that this
will cause all entries to be lost. However, the software version is retained,
as is the registration on the Internet Radio Portal. Unless you log in with
another user account, your radio favorites will also be retained.

Software update

Firmware upgrades are offered at irregular intervals. You can check for
them yourself or set the device to automatically check for updates and
install them as soon as one is available. When new software is found and
downloaded, a message will appear and you must confirm it by clicking OK
to install it. The settings you have previously made and saved channels etc.
will be retained after an update.
Note: Make sure that the network connection is stable before
downloading. If the power supply is interrupted during download or
software installation, this may cause malfunctions.
About
Displays the firmware version and the Radio ID.

Display illumination

Set the display illumination to HIGH, MEDIUM or LOW. You can also set
the duration after which the device should automatically switch off if it is
inactive (Off > 2 hours > 4 hours > 5 hours > 6 hours) Select NAVIGATE with
and press to confirm.
EN
47