ALPATEC RCMB 21 Notice D'utilisation page 8

Notice RCMB 21:notice RC_20ET
SPECIFICATIONS
Model
Voltage
Maximum power
Minimum power
Classe
Protection
This appliance has been designed for wall mounting only. Do not use it in another position.
SECURITY DISTANCE TO BE RESPECTED :
- Select a wall fitting the product weight.
- Mark the place of the 2 screws on the wall (distance of 43,5 cm between) (Fig. 2).
- Use a level to check the horizontally of the heater.
- Drill the holes, insert screw anchors and put the two screws inside.
- Place the appliance in front of the screws, and put them inside the mounting holes of the support
(L shaped).
- Move the appliance to the right and downwards to fix it.
- Use the most convenient pre-cut cord 'knock out' to pass the power cord.
- Make the electrical connexion
'L' shaped
hole
Cord 'knock out
10/10/12 11:32 Page 8
RCMB 21
220 – 240 V – 50 Hz
2000 W
1000 W
II
IP 22 (volume 3)
USING
8
D= 43,5 cm
Fig. 2
'L' shaped
hole