Kenmore 132901660A Instructions D'installation page 7

Releasing Drain Hose
Removing shipping hardware
Installing hole plugs
Locate hole plugs in the small bag supplied with
washer instruction guides. Cut them apart from
each other and insert them in the holes in washer
back panel.
x 2
x 3
x 3
7
Installation Instructions
The drain hose is secured in place with two
plastic latching clamps. Press the locking tab
and release the drain hose.
Remove all of the following from the back of the washer:
• 3 shipping bolts
• 2 plastic clamps
• 3 shipping spacers
NOTE
Rubber expansion material on spacers may need time to
relax before they can be easily pulled through shipping hole.
IMPORTANT
Save all shipping bolts and spacers for future use. If the
washer is to be transported at a later date, the shipping
hardware must be reinstalled to help prevent shipping
damage.