Hazardous Materials; Faults; Preventing Material Damage; Leakage And Pipe Breakage - BADU BNR 400 Traduction Du Manuel D'utilisation D'origine

 Check the electrical system regularly to ensure it is in proper
working condition.
2.7.2

Hazardous materials

Ensure that leaks of dangerous pumped fluids/gases are led

away without endangering people or the environment.
 Decontaminate the pump completely during disassembly.
2.8

Faults

 In case of a fault, immediately switch the pump off and
remove it from operation.
 Have all faults repaired immediately.
2.9

Preventing material damage

2.9.1

Leakage and pipe breakage

Vibrations and thermal expansion can cause pipes to break.
If the pipe forces are exceeded, leaks can occur at the screwed
connection or the pump itself.
 Do not use the valve as a fixed point for the pipe line.
Connect pipes free of load and mount them elastically. Install

compensators if necessary.
 If the unit leaks, the unit may not be operated and must be
disconnected from the mains power supply.
2.9.2

Moisture

Moisture can lead to malfunctions, defects on the device or spark-
overs.
 Protect the control against moisture.
01|2020
Safety
EN 9