Samsung NX60T8751SS Manuel D'utilisation page 57

Others
Problem
The product is not The appliance has been
level. installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
The kitchen cabinets are
not properly aligned and
make the range appear to
be not level.
The display goes The electrical outlet
blank. Ground Fault Interrupter
(GFI or GFCI) has been
tripped and needs to be
reset.
Your digital control has
been damaged.
NX60T8751SS_AA_DG68-01219A-00_EN.indd 57
Cause Action
Make sure the floor is level,
strong, and stable. If the floor
sags or slopes, contact a
carpenter.
Check and level the range. (See
the Installation Instructions.)
Ensure that cabinets are
square and provide sufficient
room for installation.
Replace fuse or reset circuit
breaker.
Problem Cause
Food does not The wrong cooking mode
bake or roast is selected.
properly in the
The oven racks have not
oven.
been positioned properly
for the foods being
cooked.
Incorrect cookware or
cookware of improper
size is being used.
The oven thermostat
needs adjustment.
There is aluminum foil on
racks or oven bottom.
The clock or timers are
not set correctly.
Food does not The oven controls are not
broil properly in set properly.
the oven.
The oven door was not
closed during broiling.
The rack has not been
properly positioned.
Action
See page 23.
See page 27.
See page 18.
See page 41.
Remove foil.
See page 16.
See page 32.
See page 32.
See the broiling guide on page
33.
English 57
3/26/2020 8:39:48 PM