Using The Divider - Samsung NX60T8751SS Manuel D'utilisation

Gas oven
Removing the Gliding rack
NOTE
You can install the Gliding rack in any rack positions except the highest (level 7)
and lowest (level 1) rack position in the oven.
30 English
NX60T8751SS_AA_DG68-01219A-00_EN.indd 30
• With the Gliding rack in the "Closed"
position and the oven off and cool, grasp
the rack and frame and pull both forward
to remove.
CAUTION
Do not install the Gliding rack directly
above the Flat rack and Air fry tray.
You will not be able to install it properly
and the rack could fall.

Using the divider

• To use twin mode operation, insert the divider.
• You cannot use the Self-Clean or Steam-Clean functions when the divider is
installed in the oven cavity.
• Handle the divider with both hands.
• Use oven gloves when inserting or removing the divider.
To Install the Divider into the Oven Cavity
1. Insert the divider into the 4th rack
2. Push the divider in until its back end
3. If the divider is installed correctly, the "-"
CAUTION
If the Range displays "-dC-"
• Check the divider to see if it is installed correctly.
position of the cavity.
rests against the back of the cavity.
icon appears on the display.
3/26/2020 8:39:34 PM