Philips sonicare HX7990 Mode D'emploi page 14

EnglisH
14
Problem
The UV clean LED
flashes quickly.
The UV light does not
go on.
The brush head of my
toothbrush does not
fit in the sanitizer.
OR CONSEQUENTIAL DAMAGES BASED
UPON BREACH OF WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, TORT, OR ANY
OTHER LEGAL THEORY. SUCH DAMAGES
INCLUDE, WITHOUT LIMITATION, LOSS OF
SAVINGS OR REVENUE; LOSS OF PROFIT;
LOSS OF USE; THE CLAIMS OF THIRD PARTIES
INCLUDING, WITHOUT LIMITATION, DENTISTS
AND DENTAL HYGIENISTS; AND COST OF ANY
SUBSTITUTE EQUIPMENT OR SERVICES. SOME
STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR EXCLUSION
MAY NOT APPLY TO YOU.
Troubleshooting
This chapter summarizes the most common
problems you may encounter with your sanitizer. If
you are unable to solve the problem, contact the
Customer Care Center in your country.
Solution
The UV light bulb must be replaced (see
chapter 'Replacement').
Make sure the door is properly closed.
Make sure the sanitizer is plugged into a live
power outlet.
The UV light bulb must be replaced (see
chapter 'Replacement').
Check the list of brush heads that fit in the
sanitizer (see chapter 'Introduction').