Qilive Q.5147 Manuel D'utilisation page 22

EN
5. Rinse the primary filter thoroughly with
fresh water, until all dirt is removed.
7. Let the primary filter dry completely. Do
not expose neither the HEPA dust filter
and the primary filter to direct sunlight.
Note: The dust filters cover will not close unless the filters are reinserted. Insert the filter
with the tab facing up. Replace the HEPA dust filter every two months.
5.2.3 CLEANING THE ROLLING BRUSH
1. Place the robot vacuum cleaner upside
down on a smooth, stable, clean
surface. Pinch the frame release tabs
and lift up the frame.
3. Remove
substances such as long hairs or
strings wrapped around the rolling
brush using a cleaning brush's knife.
debris and any
6. Wipe the inner and outer dust bin with
a clean, dry cloth.
Note: Do not wash or immerse the dust bin
in water or other liquids!
8. Replace the HEPA dust filter into its
primary filter. Close the filter unit cover.
Note: Prior installation, ensure that the
primary filter is completely dry.
2. Remove the rolling brush.
foreign
4. Wipe the rolling brush's interior with a
dry cloth.
22