Cleaning The Dust Filters - Qilive Q.5147 Manuel D'utilisation

5.2.1 EMPTYING THE DUST BIN
Note: When separating the dust bin, pay attention not to spill the dust out of the dust bin.
Immediately empty the dust bin in the following cases:
• When the noise suddenly increases.
• When the suction power suddenly becomes weak.
1. Press the dust bin release button and
pull to remove it from the robot vacuum
cleaner.
3. Empty the dust bin into a dustbin and
wipe it with a damp cloth, or with a
cleaning brush.
completely dry before replacing.
5.2.2

CLEANING THE DUST FILTERS

1. Press the dust bin release button and
pull to remove it from the robot vacuum
cleaner.
3. Remove HEPA dust filter by grasping
the tab. Separate the HEPA dust filter
from the primary filter.
Ensure the dust bin is
2. Open the dust bin cover by pushing
the cover down in the direction of the
arrow on the cover.
4. Install the dust bin into the main unit.
2. After emptying the dust bin, open the
filter unit cover.
4. Shake off debris by tapping the HEPA
dust filter against the trash container.
Use the cleaning brush, if necessary.
Note: Do not wash the filter with water!
21 21
EN