Publicité
Les langues disponibles
Les langues disponibles
As soon as the temperature falls below the adjusted value, the unit activates the power socket 2
and switches on the consumer (heating). When the adjusted temperature is exceeded, the unit
activates power socket 1 and switches on the consumer (cooling).
Example: The nominal value is set to 25° C, the cooling and heating control precision at 1° C.
As soon as the temperature rises to 26° C (nominal value + cooling control precision) the cooling
unit starts. As soon as the temperature drops below the nominal value (here 25° C) the cooling
unit will stop.
If the temperature drops to 24° C (nominal value - heating control precision) the heating unit
starts. As soon as the temperature rises more than to the nominal value (here 25° C) the heating
unit will stop.
A minimum deactivation of 3 minutes prevents heating and cooling work against each other.
The T Controller Twin has got a rechargeable battery so the programmed data will not be
lost in case of power failure. After starting the unit up, it takes about 24 hours until the
battery is charged and the data remain stored.
For safety reasons, you should control the nominal values, especially after a power failure.
5. Technical Data
Display:
Measurement range:
Resolution:
Loading capacity of contact:
Air Humidity:
Adjustment range:
Adjustment accuracy:
Power requirements:
Humidity:
6. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer's
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss.
Please note that the product is not defective under the terms of this warranty where the product,
or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used.
These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance.
Before calling your dealer please ensure you have read and understood the operating instructions.
If you have any questions your dealer cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
0.1° C
- 40 up to 99° C
0.1° C
1,200 Watt at 220 V AC
below 80%
16 – 40° C,
+/- 1° C
220 V, 50 Hz
< 85%
- Technical changes reserved – 11/2013
7
Publicité
